Average Review (29):

Straight, accurate, splinter-free cuts made easy

  • Rip, cross cut, and make angled cuts up to 50" long in plywood, MDF, and panels
  • Simply align the Guide Track with your marks to make accurate cuts
  • Hold track in place without clamps thanks to anti-slip guide strips
  • Prevent splintering with anti-chip strips that support material during the cut
  • Begin cuts easily with a Starting Block that supports the saw and allows normal blade guard operation
  • Mount almost any circular saw—left or right blade—to the Universal Sled
  • Universal Sled is compatible with the Kreg Rip-Cut™
  • Take your saw to the material instead of having to take your material to the saw
  • See a video on how to break down large panels with the Accu-Cut and the Rip-Cut

$79.99 USD

ITEM No.: KMA2700

Add to Cart


Transform your circular saw into a high-performance, track-guided cutting tool

Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 50" long in plywood, MDF, and other large panels with super simple setup, precise accuracy, and amazing control.

The Accu-Cut guides your circular saw along an aluminium track that keeps the saw moving in a straight line easily. The Accu-Cut™ design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts. Plus, the track makes it easy to make straight cuts on sheets that don't have a straight, flat edge.

Circular saws don’t have effective guides that keep them moving straight along a cut line. Plus, it can be difficult to see the blade’s cutting path. Together, these things make it challenging to keep a saw on your desired cut. Circular saws also often cause splintering of face veneers. The Accu-Cut™ solves these problems. The Accu-Cut™ is portable, too, so you can take your saw to the work piece and cut with precision, rather than having to handle heavy sheets on a table saw. 

The Accu-Cut™ is easy and intuitive for a novice to use, but robust enough for professionals. Because it eliminates the need to keep the saw straight and manually guide the saw along a cut line, the Accu-Cut™ is ideal for less experienced users. Accu-Cut™ also makes professionals faster and more productive because it makes a variety of cuts quickly and easily in the shop and on the job site.

Accu-Cut & Rip-Cut - Breaking down the difference

How to break down large panels with the Accu-Cut™ and the Rip-Cut™

Using the Accu-Cut sled on the Rip-Cut

How to use the Accu-Cut™ Universal Sled with the Rip-Cut™


Guide Track

Aircraft-quality aluminium with dual anti-chip, anti-slip guide strips 

Saw Sled

Accepts left- and right-blade saws
Built-in indexing stop and precision cursor

Cut Length

Maximum 50" (1270mm)


(1) Universal Saw Sled, (2) 26.5" Aluminium Guide Tracks, (2) Track Connectors, (1) Starting Block, (1) Track Indicator Clip, detailed setup and use instructions


Proposition 65

Manual North American Manual

Reviews for "Accu-Cut™"

Average Review:


I purchased the ACCU-CUT today, as I am building my own pooltable. Needless to say the cuts are accurate, and precise. Thx Kreg


By Kamon Simmons

April 23, 2020

time saver, while increasing my precision

I routinely break down sheets of plywood. I have an old cheap skil saw. In the past, I used a square aluminum bar as a straight-edge, countless measuring, allowing for blade curf and 1 3/8 inch from the guide, clamping and taping where the cut will be so there is no chip out. Now, with Accu-Cut, I measure and make the cut. Really that is it. I am amazed at how fast I can break down my 4X8 sheet. The cuts are accurate and chip free. I do use it with the additional clamps, just to make sure nothing moves.


By Francis Baker

March 6, 2020

Accu-Cut Guide

Some time back, I was trying to break down a sheet of plywood. I had tried to do that freehand with my circular and a straight edge just didn't cut it. Pun intended. So, I went to my local Lowe's Home Center and found this Kreg Accu-Cut Guide. I purchased that and commenced to cut down this plywood for my project. Mind you, I'm a novice woodworker and no expert by any means. But when using this and the circular saw tray that is interchangeable from the Rip Cut Guide to this, it made my task so much more easy. I buy a lot of Kreg products and will continue to do so. I trust their products and will stand by them.


By Hans Hartung

February 9, 2020


I purchased the 53” accu-cut to use with my Porter Cable saw. The front of the platform begins to leave the end of the track 7” before the 48” cut is completed and as that happens the platform experiences side to side wobble, destroying the straight cut. Technical service explained there was no way to fix that short of buying an extension kit for another $90! No warning exists suggesting some saws don’t work with the accu-cut and a return is not possible I was told. The track need to be 60” long to correct the problem. Be cautious before buying this item.


By Larry Mindrup

December 19, 2019

Great product, but some parts need to be replaced

I purchased this device to rip large sheets of plywood. I own several Kreg tools and they are superb. My only fault with this device is the connecting stop screws used to join the two rail sets together. The "Phillips" set screws are substandard. The impression for the screw head are so shallow that even a prince tip will not fit enough to fasten down the two halves. It would have been better if they'd used either an Allen or Torx tip type set screw. With this combination I have now, the two halves will not stay together.


By Quentin Sligh

September 1, 2019

Read more reviews

Get Inspired

This website uses first party and third party cookies to improve your experience and anonymously track site visits. By visiting this website, you opt-in to the use of cookies. OK